AirBench FP-J - High Volume Fume


AirBench FP-J is specified for high volume fume extraction and is provided with deep carbon cells. This model is designed for similar applications to the 'E' range but for greater quantities of fume and production level duties.

Sample applications may include solvent washing, dipping, adhesives in large volumes, prototype infiltration. This range can be specified for almost any fume application including spray painting and air brushing.

Certain substances cannot be filtered by standard grade carbon filtration; see our carbon effectiveness guide here. For these applications, we recommend our 'R' configuration - use the menu on the left to find out more.

Glue fume extraction   Petrol fume extraction   Resin fume extraction   Glue fume extraction
Click images to expand

AirBench FP is a heavy duty downdraft bench, and is constructed from fully welded 2mm steel panels, powder coated grey. The surface is constructed from 3mm thick perforated steel, powder coated after fabrication with a smooth finish.

Filters are positively clamped against soft rubber seals; filters can be quickly accessed via the top for cleaning. Replacement is also via removal of the surface. Filter changes can be accomplished in minutes.

All units are supplied with an integral 240v fanset with IP56 motor enclosure; on/off switch (optional speed control); 3m mains lead; and fused plug. A precision filter pressure loss gauge is fitted as standard on all units to allow real-time monitoring of filter condition.

AirBench FP is robust, and is designed for continuous, production level duty with surface loads up to 150kg. Performance and pricing is identical to comparable EX and FN models.

Specifications may vary; contact us to discuss the correct model and filter selection for your application.		 AirBench FP - Heavy Duty Downdraught Bench

Applications Select to view available models

Request Information

Sorry, we've had to temporarily disable our on-line form because someone is interfering with it. You can request information by emailing us at:

sales@airbench.com 

Related Downloads


Dimensions and Models FP-J

Dimensions and Models
Width
Depth
Height
Model No
  670 660 840 FP066784J
1270 660 840 FP126784J
1870 660 840 FP186784J
1270 960 840 FP129784J
1870 960 840 FP189784J

Construction Specifications FP Models

  • Body: Welded, formed 2mm mild steel panels; powder coated grey after fabrication.
  • Surface: Perforated 3mm mild steel; powder coated grey after fabrication
  • Filter housing: Positively clamped against purpose made soft rubber seals
  • Filter access: Via removal of top surface for cleaning or replacement.
  • Power supply requirements: 240V single phase as standard. 170w - 1100w dependant on model. 110V version available.
  • Mains connection: 3m mains lead supplied as standard
  • Filter Monitoring: Precision differential pressure gauge fitted as standard.

Prefilter EU4/25

  • Type: EU4/25
  • Description: 25mm deep V-section pleated panel
  • Construction: Galvanised steel frame. Fully bonded media.
  • Grade: EU4 (approx 95% effective at 5 microns)
  • Estimated life: 6-12 months dependant on level of use.

Main Filter Deep Carbon Cell

  • Type: Deep carbon cell
  • Description: 300mm activated carbon cell
  • Construction: Galvanised steel frame. Fully bonded and compacted media.
  • Grade: 207C carbon as standard
  • Estimated life: 6-12 months dependant on level of use.